The Ethernet Power Controller II is a rack mount power
switch used for remote control, automatic reboot, voltage and current
monitoring.
FEATURES
Web
Interface
The internal web server is accessible from any standard web browser.
Simply enter an IP address, and the controller may be configured and
controlled via the web.
Auto-Ping
This powerful feature automatically monitors a remote IP address. If
a server, router, or other TCP peripheral goes down, the controller
will automatically reboot it, without user intervention.
16
Switched Outlets + 2 Unswitched Outlets
Eight switched circuits are provided, each with a pair of 110/220VAC
outlets. Each pair of outlets can be controlled independently. The outlets
are spaced properly for large adapters and plugs. Two unswitched circuits
are provided for connection to “always on” devices.
Manual Override Controls
Front panel controls are provided to manually override software settings.
Each outlet can be switched on or off manually, or to “REM”
for remote software control. Two LEDs display status for each relay.
Password Security
Password security is provided to limit access to the power controller.
Sequenced “On Timer”
A programmable delay timer allows outlets to be switched on in sequence,
rather than simultaneously. Most electrical devices draw more power
when they are initially switched on. Using this timer, more equipment
can be attached to a single circuit without overloading.
Redundant Power Supply
Dual, redundant power supplies are included. The loss of either main
power circuit will not affect the power controller. Separate A/B power
loops are provided for redundant equipment.
Field Upgradable Firmware
Firmware is field upgradable via Ethernet. Memory expansion is field
upgradable.
PACKAGE CONTENTS
- Ethernet Power Controller II
- Ethernet Cable – Straight Through
- Dual Power Cords – permanently attached per
UL requirements
- Quick Start Card
only